Transceiver & Remote

Two Transceivers are provided with the standard two alarms DryBuddy system kit. The first transceiver is plugged into a standard electric socket in the wall of the patient's room, preferably as close as possible to the sleeping patient. If you wish to wake the patient with an alarm, any 120V AC alarm device (such as a radio, buzzer, light, and/or the supplied audible alarm) must be plugged into the socket at the bottom of the transceiver. The second transceiver is plugged into a standard electric socket in the parent/caretaker's room. An alarm can be plugged into this transceiver to get the attention of the caregiver.

Two transceivers with on/off remote controls are provided per standard complete DryBuddy System kit. Two audible alarms are also provided for the user's convenience.

One Wireless Remote keyfob is provided to help to set-up and reset the system and transceivers after each use. This helps the user with setting and turning off the bed-wetting alarm system. Convenience at your fingertips!

Note: A transceiver can be placed anywhere in the house where there is a standard electric outlet. There is no other limit to the number of transceivers used, so numerous alarms can be located in the house. There is also no distance limitation other than the transceiver/alarm be located in the same house as the patient.

General Note: Please read the FAQ section for additional information that may be relevent to the Transceiver and its use.

Share With Friends